The best
coating
isn't one

Equisol Pro E365

Pro E365 is a penetrating, non-film forming, clear exterior timber oil that highlights the natural beauty of timber grain with a signature matt finish. It is Australian made timber oil for Australian conditions.

Pro E365 migrates and diffuses into the timber for long lasting protection from within, minimising warping and splitting. The environmentally-friendly linseed oil base is specially formulated with mould and algae inhibitors. This helps resist the growth of black mould on your deck while nourishing and preserving the timber. Enhanced UV absorbers also help mitigate the effect of sunlight exposure. Use the clear timber oil to allow the natural silvering process, or add an Equisol Colour Tone for rich colour that lasts longer.

Clean up: Water
Sizes Available: 1L, 5L, 10L
Coverage: Softwood: 6-10m2 per litre.
Hardwood: 10-16m2 per litre.
Protects Against
  • Easy single pack application
  • Easy to use and maintain
  • 2 coat system
  • Penetrating timber oil stabilises timber moisture content and allows water to escape instead of sealing it in under film
  • Water repellent to keep timber dry from the inside out.
  • Non film-forming
  • Dirt Resistant
  • Scratch resistant and easily repaired
  • No cracking, peeling or blistering
  • Enhanced UV absorbers
  • Formulated for harsh Australian sub-tropical climate
  • Matt finish enhances natural timber grain and beauty
  • Protects against effects of moisture, sunlight and mould
  • Nourishes timber to minimise cupping, warping and splitting
  • Includes powerful mouldicide and algicide
  • Effective in sealing pressure treated timbers
  • Can be applied on fresh timber without weathering
  • Can be applied to seasoned or unseasoned timber
  • Recommended for pre-finishing/pre-oiling before installation
  • Can be wet stacked for easy pre-oiling
  • No oily residues weeks after coating in cold wet climates
  • May be applied to either rough sawn or dressed timber
  • 2 coats are all that needed
  • Range of 6 architectural colour tones can be mixed in, or leave as clear to allow timber to silver naturally
  • No sanding in-between coats
  • Can be recoated once touch dry (for best result, leave for 24 hours if possible)
  • Can be applied in direct sun and cold weather
  • Clear coat is clear without green staining
  • No wet edge
  • Easy maintenance – can be recoated without harsh sanding

Buy Now

Colour Tone Dark Brown

Dark Brown

Colour Tone Red Brown

Red Brown

Colour Tone Black

Black

Colour Tone Medium Brown

Medium Brown

Colour Tone Pale Brown

Pale Brown

Colour Tone Grey

Grey

Choose Your Tone

Colour Tones are available to mix with Equisol to maintain the natural timber colour character, delay silvering, and retain the "freshly oiled look" for longer. If you wish to retain the natural timber colour, use Equisol without a Colour Tone.